1. Use fire extinguishers to calm the flames. Usually, after doing this, the fire is extinguished and the battery is still smoking. Most fire extinguishers can achieve this effect.

2. Because lithium batteries will reburn, it is very important to cool them with plenty of water if they are not cooled down. (Attention) Watering all the time.

3. Smoke is harmful to health. Don't smoke in or out.

4. It's better to move the burning battery outdoors and call the fire department to deal with it.

What measures should be taken to prevent lithium batteries?

1. If all batteries are charged on a special charging rack, the electric bicycle will be safer.

2. The charging rack should have large and easy-to-operate wheels and be made of non-flammable materials. And put it at the gate. Nothing will prevent the charging station from pushing out of the door.

3. If there is a fire, the first reaction is to push the charging rack out of the room.

4. Place batteries, chargers and smoke alarms on the charging rack. Only an extension line is provided on the charging rack, so there will be no other interference when the charging rack is pushed out of the door. When the charging rack is pushed out of the door, the power plug should be easily removed.

5. Use a timer on the power supply of the charging rack to avoid charging at night.

6. Put a 10lb. or ABC and ClassD fire extinguisher on hand. When the fire is extinguished, water can be taken to cool it. Battery types and fire risk of electric bicycles (hoses, buckets, sprinklers, etc.).

What improvements do carbon coatings bring to the performance of lithium batteries?

1. Improving the consistency of battery packs and reducing the cost of battery packs;

2. Reduce the internal resistance of the battery and inhibit the increase of dynamic internal resistance during the charge-discharge cycle.

3. Improve the adhesion of active materials and collectors, and reduce the cost of plate manufacturing.

4. Prevent the corrosion of electrolyte to collector;

5. Reduce polarization, improve rate performance and reduce thermal effect.

6. Comprehensive factors can extend the service life of batteries.

7. Coating thickness: conventional one-sided thickness of 1-3 um.