1. Add the oxalic acid needed every day into the drum, add water to dilute, use metering pump or through regulating valve, add the medicine continuously at the entrance of the circulating pump.

2. Mainly used in circulating cooling water system, such as circulating cooling water system, oxalic acid effect is good, strong regulation ability.

3. Oxalic acid for power plant is weak acidity, pay attention to labor protection during operation, and rinse with plenty of clean water after contact.

Oxalic acid is an acidic liquid. In power plants, it is an auxiliary chemical reagent. Through its regulation, in some equipment, it can adjust the pH value and improve the environment for the internal circuit.

How to Enhance the Stability of Oxalic Acid

1. Adding solid powder can stabilize the refined oxalic acid. Solid powders depend on the wettability of oil and water to solid powders and will remain at the water-oil interface.

2. The charge of the droplets has a significant effect on the stability of oxalic acid. The more oxalic acid ions adsorbed on the droplets, the more charged the droplets are, the more stable the emulsion system is, and the greater the ability to prevent the droplets from coalescing. The droplets are generally charged.

3. The higher the viscosity of the dispersion medium, the higher the stability of the refined oxalic acid.

The stability of oxalic acid should be enhanced. Attention should be paid to the addition of stabilizers which do not react with oxalic acid as an auxiliary agent, and a little charge can be added to maintain the stability of ion movement.

In what ways does industrial oxalic acid dissolve in water?

1. Pure anhydrous industrial oxalic acid is a white, translucent, crystalline solid. Industrial oxalic acid is easy to dissolve in water, and its solubility increases with the increase of temperature. A lot of heat can be released when it dissolves.

2. If industrial oxalic acid is prone to react in air, it should be sealed. If it is soluble in water, it should not contact with water.

3. Its aqueous solution has astringent taste and slippery feeling. The solution is strong acidic, can react with alkaline substances, and has the commonality of acidity.